Skip to main content

3M™ Aqua-Pure™ Plastic Housing Whole House System

1 Products Available

Hover over image to zoom

3M™ Aqua-Pure™ Plastic Housing Whole House System

About the product

The Aqua-Pure™ Plastic Whole House Water Filtration System reduces sediment and other contaminants (cartridge dependent) to help provide cleaner, clearer water from the water used throughout your entire home.

Product Options

1-1 of 1 Products

Select Filters to narrow your product list

Product name and IDs 3M ID Overall Width (Imperial) Overall Width (Metric) Micron Rating Flow Rate (Imperial) Overall Height (Imperial) Overall Height (Metric) Flow Rate (Metric) Filter Type Application Industries Product Series Brand

3M ID

7100176006

Overall Width (Imperial)

4.5600 INCH

Overall Width (Metric)

11.5800 CENTIMETER

Micron Rating

5.0000 MICROMETER

Flow Rate (Imperial)

8.0000 GALLON_PER_MINUTE

Overall Height (Imperial)

5.4100 INCH

Overall Height (Metric)

13.7500 CENTIMETER

Flow Rate (Metric)

30.2800 LITER_PER_MINUTE

Filter Type

Drop-in Cartridge

Application

Whole house water filtration

Industries

Consumer water

Product Series

AP

Brand

Aqua-Pure™

Product Details

The 3M Aqua-Pure™ Water Filter System is a whole-house water-filtration solution for larger homes and commercial units. It helps reduce particulate, rust, and the taste and odor of chlorine from cloudy, colored, or musty water. This simple canister filter system uses standard-size filtration cartridges. A built-in pressure relief button makes cartridge changes simple. By helping improve the clarity, taste and odor of tap water, it provides an economical alternative to bottled drinking water. The simple-to-install system handles a heavy load, providing a flow rate of up to 45 gallons (170.3 liters) per minute. The system is covered by a 10-year limited warranty against manufacturing defects.

Manufactured by 3M Purification Inc., formerly CUNO Incorporated, the Aqua-Pure® AP802 Water Filter System is installed at the point-of-entry. The single canister unit is installed with 1-inch NPT inlet and outlet connections. All parts are manufactured from FDA CFR-21 compliant materials. The system provides a flow rate of up to 45 gallons (170.3 liters) per minute and has an operating pressure range of 25-100 psi (172-690 kPa) and operating temperature range of 40-100°F (4.4-37.8°C). It comes with a mounting bracket and wrench. A pressure relief button is incorporated into the system for ease in cartridge replacement. 3M recommends regularly scheduled maintenance. Cartridges must be replaced every six months, or sooner if there is a noticeable reduction in flow rate. If water is microbiologically unsafe or of unknown quality adequate disinfection should be used before or after the water filtration system.

Whole-house water treatment systems are sometimes referred to as point-of-entry (POE) systems, and are installed immediately downstream from the water meter or well pump. A whole-house filter that reduces iron, particulate, and chlorine odor and taste will typically treat all water entering a residence, protecting plumbing and fixtures while reducing unpleasant tastes, colors and odors. A water softener system will often be bypassed by a cold drinking water line that provides salt-free drinking water. Regular maintenance of a whole-house water filter system may be as simple as replacing a filtration cartridge every six months, or may require a service call. The initial expense of a whole-house water filter system often pays off in the long term, as it may protect pipes and fixtures from iron and/or hard water deposits and discoloration and provide savings in bottled water costs.

  • Flow rate will vary with cartridge used. Please refer to the associated filter replacement page for specific flow rates.
  • Built-in pressure relief for easy cartridge replacement
  • Point-of-entry installation for whole home filtration
  • Manufactured from FDA CFR-21 compliant materials
  • Depending on replacement filter cartridge used, can also reduce chlorine taste and odor

Product Specifications

Industries
Industries

Consumer water

Brand
Brand

Aqua-Pure™

Overall Height (Imperial)
Overall Height (Imperial)

5.4100

Overall Width (Metric)
Overall Width (Metric)

11.5800

Micron Rating
Micron Rating

5.0000

Filter Type
Filter Type

Drop-in Cartridge

Product Series
Product Series

AP

Flow Rate (Metric)
Flow Rate (Metric)

30.2800

Overall Width (Imperial)
Overall Width (Imperial)

4.5600

Application
Application

Whole house water filtration

Flow Rate (Imperial)
Flow Rate (Imperial)

8.0000

Overall Height (Metric)
Overall Height (Metric)

13.7500