3M™ Aqua-Pure™ Under Sink Full Flow Water Filter System 3MFF100

"We've detected that you're visiting from {0}. Would you like to switch languages for tailored content?"

Product options Product details Product specifications Resources Looking for more?

Hover over image to zoom

3M™ Aqua-Pure™ Under Sink Full Flow Water Filter System 3MFF100

3M™ Aqua-Pure™ 3MFF100 Under Sink Water Filter Change Video

1-4 of 9

About the product

The 3M™ Aqua-Pure™ Under Sink Full Flow Water Filter System 3MFF100 is a drinking water filtration system that can be installed on your existing primary faucet to provide filtered water at a high flow rate. It reduces particulates, chlorine taste and odor, parasitic protozoan cysts, lead and select volatile organic compounds (VOCs) such as benzene and p-Dichlorobenzene.

Ask an expert

Product options

1-1 of 1 Products

Select Filters to narrow your product list

Product name and IDs	3M ID	Overall Width (Imperial)	Overall Width (Metric)	Micron Rating	Flow Rate (Imperial)	Overall Height (Imperial)	Overall Height (Metric)	Flow Rate (Metric)	Product Color	Filter Type	Net Weight (Metric)	Capacity (Imperial)	Capacity (Metric)	Application	Industries	Product Series	Brand	Category Name
3M™ Under Sink Water Filter Cartridge 3MFF101, 5613432, Full Flow, 0.2um, For 3MFF100, 6/Case	3M ID 7000125865	Overall Width (Imperial) 4.5 in	Overall Width (Metric) 11.43 cm	Micron Rating 0.2 μm	Flow Rate (Imperial) 2.51 gal/min	Overall Height (Imperial) 14.69 in	Overall Height (Metric) 37.308 cm	Flow Rate (Metric) 9.5 l/min	Product Color White	Filter Type SQC	Net Weight (Metric) 1.59 kg	Capacity (Imperial) 5999 gal (us)	Capacity (Metric) 22710 l	Application Under sink water filtration	Industries Consumer water	Product Series AP	Brand Aqua-Pure™	Category Name Replacement Water Filter Cartridges

Product details

3M™ Aqua-Pure™ Under Sink Full Flow Water Filter System 3MFF100 is 3M’s state-of-the-art drinking water filtration system with a capacity of up to 6,000 gallons. This system installs under the sink and provides on-demand water filtration for drinking (water, coffee, tea) and cooking purposes. It is NSF-certified to reduce particulate, chlorine taste and odor, parasitic protozoan cysts, lead and select volatile organic compounds (VOCs) such as benzene and p-Dichlorobenzene. The universal system design allows for use on both chlorinated (municipal) and non-chlorinated (well water) systems. A key feature of this water filter is that it is designed to flow at the rate of your faucet (up to 2.5 gallons per minute), minimizing loss of water pressure commonly seen with using water filters. The advanced triple stage filtration process helps provide cleaner, clearer, better tasting drinking water. The first stage nonwoven media captures the larger particles. During the second stage, the pleated sub-micron membrane reduces particles as small as 0.2 micron. In the third and final stage, the carbon block reduces chlorine taste and odor and select VOCs that may be present in the drinking water. Filter change-outs take a few minutes with the easy Sanitary Quick Change (SQC) design. This design allows for fast and easy cartridge change-outs without having to contact the filter media or the need for a filter wrench.

The science inside matters.

The 3MFF100 might look like an ordinary filter on the outside, but inside it’s anything but ordinary. Its three-stage filtration system with carbon block technology provides filtration you can count on to help reduce contaminants that may be in your drinking water. Each product comes with a performance data sheet that shows the list of contaminants that the filter has been shown to reduce and certified by a third-party NSF.

Stage 1: Pre-Filtration- Nonwoven filtration media that reduces larger size particles to help increase sediment holding capacity of the filter.

Stage 2: Fine Filtration- 3M two-zone microporous pleated membrane that reduces 99.99% of protozoan cysts and helps provide excellent sediment life with minimal pressure drop.

Stage 3: Final Filtration- Activated Carbon Filtration; 3M carbon block technology for reduction of lead, chlorine odor and for improved taste.

Filter Replacement

Sold separately. To maximize system performance and efficiency, regularly scheduled maintenance including replacement of the filter cartridges at the required interval, at the rated capacity or sooner if a reduction in water flow occurs, is required. The filter life is dependent on actual use and incoming water quality.

For informational purposes only. Please refer to the system manual for complete installation and use instructions. It is recommended this system be installed by a qualiﬁed professional or someone familiar with DIY plumbing projects.

Steps 1-2:

Turn off cold water supply. Open faucet to relieve pressure.

Steps 3-4:

Fasten filter head wall fasteners. Measure and cut the tubing for the filter head assembly connections.

Reduces particulate, chlorine taste and odor, lead, parasitic protozoan cysts and select volatile organic compounds (VOCs) such as benzene and p-Dichlorobenzene
Designed to flow at the rate of your faucet, up to 2.5 gallons per minute, minimizing water pressure loss commonly seen with using water filters
Design allows for fast and easy change-outs of the 3M™ Aqua-Pure™ Under Sink Full Flow Replacement Water Filter 3MFF101 without the need for a filter wrench or contact with the filter media and filter life up to 12 months
Head assembly includes a built-in shut-off valve that allows for changing the SQC filters without shutting off the water supply
Advanced triple stage filtration process to help provide cleaner, clearer, better tasting drinking water
NSF Standard 42 and 53 certified: Tested by one of the world’s most respected independent certification organizations that helps protect the world’s food, water, consumer products and environment
System includes a filter-head assembly, filter and mounting screws. Installation requires some household tools and additional plumbing components

Suggested Applications

Drinking water sink faucets in homes, offices, and schools

Product specifications

Industries	Industries Consumer water
FlowRateMetric	FlowRateMetric 9.5 l/min
Category Name	Category Name Replacement Water Filter Cartridges
Net Weight (Metric)	Net Weight (Metric) 1.59 kg
Product Color	Product Color White
Capacity (Metric)	Capacity (Metric) 22710 l
Micron Rating	Micron Rating 0.2 μm
OverallWidthMetric	OverallWidthMetric 11.43 cm
Product Series	Product Series AP
Flow Rate (Imperial)	Flow Rate (Imperial) 2.51 gal/min
Brand	Brand Aqua-Pure™
Overall Height (Imperial)	Overall Height (Imperial) 14.69 in
FilterType	FilterType SQC
OverallWidthImperial	OverallWidthImperial 4.5 in
Capacity (Imperial)	Capacity (Imperial) 5999 gal (us)
Application	Application Under sink water filtration
Overall Height (Metric)	Overall Height (Metric) 37.308 cm