Skip to main content

3M™ MicroPES™ 6F Series Flat Sheet Membrane, W134483, 508 mm Roll/Variable Pack

Hover over image to zoom

Hover over image to zoom

Hover over image to zoom

Hover over image to zoom

Hover over image to zoom

Hover over image to zoom

Hover over image to zoom

Hover over image to zoom

Hover over image to zoom

3M™ MicroPES™ 6F Series Flat Sheet Membrane, W134483, 508 mm Roll/Variable Pack
(1) Super Rapid Readout Steam Challenge Pack
(2) BI results in just 24 minutes
(3) FDA-cleared pack and ISO-compliant components
(6) Presents a challenge equivalent to the 16-towel PCD recommended by AAMI
(6) Presents a challenge equivalent to the 16-towel PCD recommended by AAMI
(1) Super Rapid Readout Steam Challenge Pack
(5) For use with 3M Attest Auto-readers 490 & 490M
(4) Monitors 270F/132C 4min & 275F/135C 3min dynamic-air-removal steam sterilization cycles

About the product

The asymmetric pore structure of 3M™ MicroPES™ Flat Sheet Membrane provides high throughput performance in a wide range of applications due to different pore sizes available.

  • Overall Width (Imperial) : 20.0000
  • Overall Width (Metric) : 508.0000
  • Micron Rating : 0.6000
  • Product Form : Roll
  • Application : Industrial membrane filtration
  • Filter Technology : Membrane
  • Product Series : 6F
  • Brand : MicroPES™

Product Details

The evenly distributed pores form an asymmetrical structure along the thickness of the membrane with pronounced depth filtration characteristics. 3M™ MicroPES™ Flat Sheet Membrane is used in various applications requiring high retention. It can be processed using common pleating and welding techniques and is also available in a wide variety of pore sizes to meet the needs of various specific applications. Chemically enhanced backwash with chemical cleaners, such as hydrochloric acid, citric acid, acetic acid, sodium hydroxide, or sodium hypochlorite, does not affect the mechanical stability of the membrane. 3M™ MicroPES™ Flat Sheet Membrane offers proven throughput performance due to its asymmetric pore structure.
  • 3M™ MicroPES™ Flat Sheet Membranes are made from polyether sulphone
  • The asymmetric pore structure of 3M™ MicroPES™ Flat Sheet Membrane provides high-performance in depth filtration for a wide range of applications due to different pore sizes available
  • The 3M™ MicroPES™ Flat Sheet Membrane retention layer is well protected inside the cross section
  • Good processability due to high mechanical strength
  • Can be processed with common pleating and welding processes
  • 3M™ MicroPES™ Flat Sheet Membranes can be sterilized by ETO or gamma irradiation
  • 3M™ MicroPES™ Flat Sheet Membranes are resistant against chemicals used in cleaning procedures, such as hydrochloric acid, citric acid, acetic acid, sodium hydroxide, or sodium hypochlorite
  • 3M™ MicroPES™ Flat Sheet Membranes can be used in applications in a wide pH range from 2 to 12
  • 3M™ MicroPES™ Flat Sheet Membranes passed the following toxicological tests from ISO 10993: Cytotoxicity; Skin Sensitization; Irritation or Intracutaneous Reaction; Acute Systemic Toxicity; Hemolysis; Pyrogenic Reactions; Mutagenicity in Ames-Test; Implantation Test
  • 3M™ MicroPES™ Flat Sheet Membrane is EU Food Contact compliant

Product Specifications

Brand
Brand

MicroPES™

Product Form
Product Form

Roll

Overall Width (Metric)
Overall Width (Metric)

508.0000

Filter Technology
Filter Technology

Membrane

Micron Rating
Micron Rating

0.6000

Product Series
Product Series

6F

Overall Width (Imperial)
Overall Width (Imperial)

20.0000

Application
Application

Industrial membrane filtration

MIM-PDP-XF

Ask an expert